Simple DALI Rotary Switch for DALI Dimming
This product is a DALI-2 switch only (rotary), required for multiway DALI dimming when purchased with a Simple DALI Rotary Dimmer (IEL-Z8-1-PSU c/w DALI-2 PSU) or Simple DALI Dimmer (IEL-Z6-1-PSU c/w DALI-2 PSU)
This Simple DALI rotary can also be used with IEL-zc-pir-st-da (Simple DALI pir sensor with DALI PSU).
When installed with any of the above products, this rotary switch provides “out of the box” control (no programming required).
For details of sensor/rotary switch control when used with Simple DALI pir sensor: View here
Full dimmable control of DALI light fittings via rotary switches from two or more switch positions (i.e. opposite sides of the room):
- Up and down dimming is achieved by turning the knob left or right.
- On and off control can be activated by pushing the switch in.
- Works with DALI light fittings, relays and loads.
- On/off and dimmable control
Adding this item to your cart, provides an additional DALI-2 rotary with NZ style faceplate (white) as default. If required the rotary can be used in an alternative client-supplied faceplate with a 30-series mount.
See below for wiring schematic and links to download datasheets.
Note: The switch must not be connected to any mains. It is powered directly from the DALI line.
Download datasheet for DALI-2 PSU Download datasheet for DALI-2 Rotary.
Schematic for multiway switching using two or more DALI-2 Rotary Switches:
