Surface Mounted Presence Absence Detector – Dimming Options – IP54 – 10A


presence absence detector
low temperature sensorcp electronicsEnergy Saving Controls NZPIR Movement Sensor + Lux Level Sensorcommercial lighting controlelectronic thermostat

$155.25$226.10 inc gst $135.00 exc gst

These compact surface mounted presence absence detectors provide automatic control for lighting, heating and ventilation loads. No external control boxes are required as the unit is self contained.

Three models are available: premium (PRM), direct dim (DD), and analogue dim (AD) all of which will switch a wide range of luminaires. The direct dim variant controls DALI or DSI digital dimming ballasts whilst the analogue dim variant controls 1–10V dimming ballasts.

IP54 rated.

The optional infrared remote handset allows the user to override the set up.

Functionality of the EBDSM presence absence detector is fully programmable using either the UHS5 or the UNLCDHS handset.

Download Product Guides via ‘Support’ tab below

Clear

Product Description

EBDSM Presence Absence Detector with Lux Level Sensing – Ceiling Mounted

These compact surface mounted PIR detectors provide automatic control for lighting, heating and ventilation loads. No external control boxes are required as the unit is self contained.

This presence absence detector comes in three variants:

  • The EBDSM-PRM is a presence absence detector for switching lighting, heating and ventilation loads
  • The EBDSM-DD is a presence absence detector with direct dimming for DSI or DALI (up to 20 ballasts);
  • The EBDSM-AD is a presence absence detector with 1-10V analogue dimming output (up to 10 ballasts)

IP54 rated.

The optional infrared remote handset allows the user to override the set up.

Functionality of the EBDSM presence absence detector is fully programmable using either the UHS5 or the UNLCDHS handset.

Standard Features of EBDSM-PRM Detectors:

  • Switching with lux level sensing
  • Switches any type of load
  • Switches any type of lamp
  • Programmable from floor level via handset
  • Absence detection functionality
  • Time delay function
  • Optional user handset available to override + control on/off and lux levels

Aditional Features of EBDSM Dimming Detectors:

  • Dimming functionality
  • Step-down illuminance
  • Maintained Illuminance (daylight linking or daylight harvesting)
  • Digital detectors can control up to 20 dimming ballasts
  • Suitable for all lighting types
  • Two channel flexibility
  • Scene setting and recall
  • Lamp burn-in
  • Analogue detectors can control up to 10 dimming ballasts
  • User handset available to control on/off, lux levels and pre-set scenes

Load Rating at 230VAC:

Resistive = 10A
Incandescent = 10A
Fluorescent = 10A
Compact Fluorescent = 10A
LED = 10A

Time Delay:

10s-99m

Download Product Guides via ‘Support’ tab above

Additional Information

Option required

EBDSM-PRM presence absence detector switching, EBDSM-DD DALI DSI presence absence detector, EBDSM-AD analogue dimming presence absence detector

Product Enquiry

  • This field is for validation purposes and should be left unchanged.
Energy Saving Controls Product Guide
CP Electronics Catalogue EBDSM-DD Product Guide
Product Guide terms
EBDSM-AD Product Guide Terms & Conditions