VITM6 Movement Detectors – Adjustable Head – Dimming + Lux – 10A


KNX Sensors NZ
presence absence detectorpresence absence detectorPIR Movement Sensor + Lux Level SensorVitesse Modular lighting control systemmicrowave sensorVitesse Modular Lighting Control System NZ

$466.70 inc gst $405.83 exc gst

The VITM6-MWS3A-DD digital dimming version is for use with a Vitesse Modular lighting control system. It is an adjustable head microwave presence absence detector with Direct Dim and time delay function (up to 20 ballasts). DALI/DSI. Supplied with 3m lead. Please order connectors and/or ceiling rose(s) separately.

All MWS3A presence absence detectors supplied as -R2 variant to meet NZ requirements. Can be wall-mounted by using MWS3A wall bracket.

Functionality of this MWS3A presence absence detector is fully programmable using either the UHS5 or UNLCDHS handsets.

Download Product Guides via ‘Support’ tab below

Product Description

Dimming Movement Detectors + Light Level Sensor with Adjustable Head

Unlike fixed head microwave presence detectors the MW3SA offers a unique presence absence detector capability by using an adjustable head.

This incorporates an innovative locking mechanism to prevent tampering. By changing the angle of the head, different detection patterns can be achieved to suit the application. An integral sensitivity adjustment allows the detector to be fine tuned to its environment. The presence absence detector is self contained and can be flush or surface mounted using a separate detector back box. The microwave sensor is sensitive to movement.

The simple plug in connections reduce installation time. The optional infrared remote handset allows the user to override the set up.

VITM6-MWS3A-DD digital dimming version is available for use with a Vitesse Modular system. It is an adjustable head microwave presence absence detector with Direct Dim and time delay function (up to 20 ballasts). DALI/DSI. Supplied with 3m lead. Please order connectors and/or ceiling rose(s) separately.

All MWS3A presence absence detectors supplied as -R2 variant to meet NZ requirements. Can be wall-mounted by using MWS3A wall bracket.

Functionality of this MWS3A presence absence detector is fully programmable using either the UHS5 or UNLCDHS handsets.

Standard Features of MWS3A movement detectors:

  • Switching with lux level sensing (IR handset adjustment)
  • Time delay function
  • Absence detection switching
  • Adjustable detection sensitivity
  • Manual on/off override via switch input
  • Active photocell (light level sensor)
  • Presence detection switching
  • Programmable via IR handset
  • On/off override via optional IR handset

Additional Features of MWS3A dimming movement detectors:

  • Dimming functionality
  • Step-down illuminance
  • Burn in feature for fluorescent tubes
  • Integral relay to reduce parasitic power
  • Manual dimming with IR
  • Two channel flexibility
  • Maintained Illuminance (daylight linking or daylight harvesting)
  • Control of DALI, DSI or 1-10V loads depending on product
  • Suitable for all lighting types
  • Manual dimming with switch inputs

Load Rating of MWS3A dimming detector at 230VAC:

Resistive = 10A
Incandescent = 10A
Fluorescent = 10A
Compact Fluorescent = 10A
LED = 10A

Time Delay:

10s-99m

Download Product Guides via ‘Support’ tab above

Product Enquiry

  • This field is for validation purposes and should be left unchanged.
Energy Saving Controls Product Guide terms
CP Electronics Catalogue MWS3A-DD Product Guide Terms & Conditions