Ceiling Mounted Photocell with Voltage Free Contact – Switching – 10A


Photocell | Lighting Control System NZ
dimming photocellPIR Movement Sensor + Lux Level SensorkWh

$154.10 inc gst $134.00 exc gst

The ALC-PRM-VFC photocell will turn lighting on when the ambient light falls below a preset level. The lighting will then be turned off when the total light level rises above a separate preset level.

An adjustable time delay prevents nuisance switching (e.g. dark clouds). The ALC-PRM-VFC phtocell can be mounted flush or surface on a ceiling.

The unit has a voltage free changeover output which can be used to switch, a BMS or lighting control system as well as switching a load directly. All functionality is fully programmable using using either the UHS5 or UNLCDHS handsets..

Download Product Guide via ‘Support’ tab below

Product Description

ALC-PRM-VFC Photocell – Voltage Free Contact – Switching 10A

The ALC-PRM-VFC photocell will turn lighting on when the ambient light falls below a preset level. The lighting will then be turned off when the total light level rises above a separate preset level.

An adjustable time delay prevents nuisance switching (e.g. dark clouds). The ALC-PRM-VFC photocell can be mounted flush or surface on a ceiling.

The unit has a voltage free changeover output which can be used to switch, a BMS or lighting control system as well as switching a load directly. All functionality of this photocell is fully programmable using using either the UHS5 or UNLCDHS handsets.

Load Rating of ALC-PRM-VFC Photocell at 230VAC:

Resistive = 10A
Incandescent = 10A
Fluorescent = 10A
Compact Fluorescent = 10A
LED = 10A

Time Delay:

0m-99m

Download Product Guide via ‘Support’ tab above

Product Enquiry

  • This field is for validation purposes and should be left unchanged.
Energy Saving Controls Product Guide terms
CP Electronics Catalogue ALC-PRM-VFC Product Guide Terms & Conditions