EBDSPIR-PRM-LV Low Voltage Switching Detector
Ceiling mounted PIR presence/absence detector 12-24V AC/DC
Low voltage variant of the EBDSPIR-PRM switching detector, providing automatic control of low voltage loads including lighting and BMS systems with optional manual control.
Functioning as a presence detector, the unit can turn lights on when a room is occupied and off when the room is empty. Optional settings allow lights to be turned off in response to ambient daylight.
All functionality is fully programmable using either the UHS5 or UNLCDHS handsets.
EBDSPIR-PRM-LV-VFC Low Voltage Switching Detector with Volt Free Contact
This low voltage switching detector functions as above, but also provides an isolated voltage free contact output.
Standard Features of EBDSPIR-PRM Switching Detectors:
- Switching with lux level sensing
- Switches any type of load
- Switches any type of lamp
- Programmable from floor level via handset
- Absence detection functionality
- Time delay function
- Optional user handset available to override + control on/off and lux levels
Load Rating of EBDSPIR-PRM Low Voltage Switching Detector:
Low voltage supply with relay output rating 16A resistive, 10A inductive
Resistive = 10A
Incandescent = 10A
Fluorescent = 6A (max 6 fittings recommended)
Compact Fluorescent = 3A
Low Energy lighting = 3A
Low Voltage lighting = 3A (switch primary of transformer)
For fluorescent lighting total power factor correction capacitance must not exceed 40μF.
3 Amp fans and ventilation equipment
Switch SON lighting loads via a contactor
Minimum load 100mA
Download Product Guides via the ‘Support’ tab above